User  
Pwd    
Register  |   Forgot Password?
Daily Weekly
Kabab Mein Haddi
Cric Cocktail
Word Wheel
Hexagon Angular Cricket
X - Factor
Indian Premier League
Latest News
   
Australia squad announced for Test series in New Zealand
ABC1 to screen ‘From the Ashes’ this Sunday
» more
 
  Team Profiles
Player Profiles
Recent Results
Upcoming Series
Firsts
 
Compiled by: Rajesh Kumar
   
 
Home :: Cric Coaching :: MOD
  There are ten different ways of getting out. They are defined below:  
 
Bowled
 Caught
 Timed out
 Handled the ball
 Hit the ball twice
Hit wicket 
 Stumped
 Leg before wicket
 Obstructing the field

 Run out

 
     
 

But first, a few necessary definitions:
The wicket is said to be broken if one or both of the bails have been dislodged and fallen to the ground. If the bails have fallen off for any reason and the ball is still in play, then breaking the wicket must be accomplished by pulling a stump completely out of the ground. If the wicket needs to be broken like this with the ball, the uprooting of the stump must be done with the ball in contact with the stump.

The field is notionally split into two halves, along a line down the centre of the pitch. The half of the field in front of the striker is called the off side, the half behind is called the leg side, or sometimes the on side. Thus, standing at the bowler's wicket and looking towards a right-handed striker's wicket, the off side is to the left and the leg side to the right (and vice-versa for a left-handed striker). The stumps of the striker's wicket are called off stump, middle stump, and leg stump, depending on which side they are on. When a batsman gets out, no matter by what method, his wicket is said to have fallen, and the fielding team are said to have taken a wicket.

 
 
  Bowled  
 
     
 

A batsman is bowled if his wicket is bowled down or broken. For this to happen, the ball must touch a stump directly after being delivered from the bowler, or be played on to the wicket by the batsman after coming off either his bat or any part of the his person. The ball can hit the wicket and the bails remain in place. In such a case the batsman is not out.

 
   
 
  Caught  
 
 

A batsman is bowled if his wicket is bowled down or broken. For this to happen, the ball must touch a stump directly after being delivered from the bowler, or be played on to the wicket by the batsman after coming off either his bat or any part of the his person. The ball can hit the wicket and the bails remain in place. In such a case the batsman is not out.

 
 
  Timed out  
 
 

If a new batsman takes longer than two minutes to appear on the field, from the time the previous wicket falls. If the umpire believes the action was willful, the batsman will be dismissed 'timed out'.
NB: This almost never happens.

 
 
  Handled the ball  
 
 

If a batsman touches the ball, which is in play, with a hand not currently holding the bat, without the permission of the fielding side. This does not include being hit on the hand by a delivery, or any other non-deliberate action.

 
 
  Hit the ball twice  
 
 
If a batsman, after the ball is struck or stopped by any part of his body or equipment, deliberately hits the ball again for any reason other than to defend his wicket from being broken by the ball, he is given out 'hit the ball twice'.
 
     
 
  Hit wicket  
 
     
  If, in attempting to hit a ball or taking off for a first run, the batsman touches and breaks the wicket. This includes with the bat or dislodged pieces of the batsman's equipment -- even a helmet or spectacles, the batsman is given out 'hit wicket'.  
     
 
  Stumped  
 
     
 

If the batsman is out of his ground and the wicket is put down by the wicketkeeper in the course of a stroke being made, the batsman is out 'stumped'. If the batsman is in the course of running and the wicketkeeper puts the wicket down, then he is not stumped, but run out.

 
 
  Leg before wicket  
 
     
 

Put simply, leg before wicket is the act of preventing the ball from hitting the wicket with any part of the body, not just the leg. The following are different situations under which an umpire decides whether to give an lbw decision or not.

While trying to play a shot, if the ball does not touch his bat or hand holding the bat, he is out lbw if the ball hits any part of his body, provided:
a) The ball is pitched in a straight line between the two sets of wickets, or
b) The ball pitches on the off side of the striker's wicket or
c) If the ball hits the striker full pitch before hitting the ground, and it would have pitched in a straight line between the two sets of wickets. The point of impact between the ball and the striker must be in a straight line between the two sets of wickets, even if it is above the height of the bails.

If the batsman does not attempt to play the ball with his bat, then he may be given out LBW if the above conditions are satisfied. Even if the above conditions are not met, he can be given out if the umpire is convinced the ball would have hit the wicket. If the ball has hit the bat before the hitting the batsman, then he cannot be given out lbw.

If the ball bounces outside an imaginary line drawn straight down the pitch from the outside edge of leg stump, then the batsman cannot be out lbw, no matter whether or not the ball would have hit the stumps.

The following diagram explains cases where an umpire may give lbw decision:
 
 

Ball 1:
The point of impact on the striker's person is not in a straight line between wicket and the wicket -- 'Not out'. But, as the point of impact is outside the line of the off stump, the striker would be out if he made no genuine attempt to play the ball -- provided that the ball would have hit the wicket.

Ball 2:
The ball would have hit the wicket -- 'Out'. The umpire must be satisfied that the ball is not rising sufficiently to pass over the top of the stumps.

Ball 3:
The ball would have hit the wicket -- 'Out'

Ball 4:
The ball pitched between wicket and wicket and providing the umpire is satisfied that the break will not cause the ball to pass outside the off stump -- 'Out'.

Ball 5:
A ball pitching outside the leg stump -- 'Not out'.
 
     
 
  Obstructing the field  
 
     
  If a batsman deliberately interferes with the efforts of fielders -- either by words or action -- to gather the ball or effect a run out. This does not include running a path between the fielder and the wicket so that the fielder cannot throw the stumps down with the ball, which is quite legal, but does include any deliberate attempt to swat the ball away.  
     
 
  Run out  
 
     
 

A batsman is run out under one of the following conditions:
a) If a batsman is attempting to take a run, or to return to his crease after an aborted run, and a fielder breaks that batsman's wicket with the ball while he is out of the crease. The fielder may either break the wicket with a hand which holds the ball, or with the ball directly.
b) The non-striker can be run out if the striker hits the ball straight down the pitch towards the non-striker's wicket, and the bowler deflects the ball on to the wicket while the non-striker is out of his crease. If the ball is hit directly on to the non-striker's wicket, without being touched by a fielder, then the non-striker is not out.
c) If the non-striker leaves his crease (in preparation to run) while the bowler is running up, the bowler may run him out without bowling the ball.
Batsmen cannot be run out while the ball is not in play -- so they may confer in the middle of the pitch between deliveries if they desire.

If a batsman is out caught, bowled, lbw, stumped, or hit wicket, then the bowler is credited with taking the wicket. In case of run out, obstructing the field, timed out no single person is credited with the dismissal.

 
 
Copyright2008, CricContest.com All Rights Reserved.
Reproduction of news articles, video or other content in whole or in part in any form or medium without express written permission of CricContest.com is prohibited.